PREMIUM LUBRICANTS

ALL FREE II  This unique combination of ingredients markedly reduces surface tension which permits rapid, deep penetration of corroded parts. Residual oil film lubricates and provides protection against subsequent corrosion. Unique spray head permits spraying from any angle allowing ALL FREE II to reach areas. (#1068*)

 

BOLTZ   The newest, most advanced penetrating lubricant on the market today. The unique ingredients in BOLTZ allow it to penetrate quicker and more efficiently than other penetrating lubricants. BOLTZ is formulated with moly for extra lubrication and lithium for effectiveness under higher heat. (#1096)

 

BULLS EYE FG  A non-staining, stable blended formula that deeply penetrates, thus eliminating sticking problems and annoying squeaks. BULL’S EYE will repel water and ice and retard rust and corrosion. Target this lubricant for all of your food processing needs. (#1109)

 

CHAIN GUARD FG Combination of high quality HVI solvent-extracted dual hydrogenated paraffinic and selected synthetic base oils. Fortified with food grade anti wear agents and a tackiness agent to impart maximum anti wear and clinging characteristics. (#1004)

 

CHILLS  Designed for the cooling of bits, blades, taps and dies in all mechanical applications. The blending of highly evaporative solvents create a chilling effect on the target work surface as well as the tool itself.  The result is a cleaner cut, with less effort and greater production. (#1019)

 

CYCLONE  Scientifically formulated for the lubrication and protection of most equipment. CYCLONE quickly penetrates and creates a protective shield around metal parts. The added benefit of superior lubrication is quickly realized on chains, gears, hinges, sprockets and other mechanical apparatus. Made with PTFE. (#101)

 

ENDURO-LUBE  Designed with the added benefit of anti-seizing characteristics. This superior lubricant dispenses in a viscous fluid phase which then sets up to a semi-gel. This gel phase acts as a protective membrane which inhibits the adherence of dust particles, as well as offering protection against rust and corrosion.(#1052)

 

FOUR WAY  Lubricates precision equipment, provides lasting protection for tools, jigs and fixtures, and penetrates and frees rusted or frozen parts. FOUR-WAY protects metals stored indoors or outdoors, displaces moisture on electrical and electronic equipment, and waterproofs ignition systems and terminals. (#1022)

 

GEAR & WIRE LUBE  Properly applied, will withstand high friction and tooth pressures without displacement. The STRINGINESS of this product insures excellent film forming, long lasting, positive lubrication and rust protection. Excellent for stamping, machine slides, cables, and anywhere underwater lubrication is needed.(#1026)

 

GLIDE  This amazing formula has the added benefit of STP® for added lubricity. The precision blend of synthetic compounds gives GLIDE superior lubrication qualities at extreme temperature ranges. As this compound rises in temperature, the viscosity will actually elevate in order to cling to the target surface. (#1097)

 

HURRICANE A blend of TEFLON and “Banana Oil”. These two components together make HURRICANE the most effective lubricant and penetrating compound on the market today. The unique ingredients in HURRICANE enable it to protect metal parts, and free locked nuts and bolts more rapidly. (#1077)

 

KWIK KUT A scientifically formulated cutting fluid that cools, lubricates and reduces friction during threading, drilling and tapping operations. KWIK KUT is colorless and thus permits constant viewing of the cutting area. It will not drip, eliminating mess and time-consuming clean up. (#1053)

 

LATHEX Concentrated, water-soluble oil, based on modern polymer lubrication technology, not a petroleum product. For all metal-working applications using water-soluble cooling-lubricating oil. Designed for faster, cooler cutting and increased tool life. (#2066)

 

LIGHTNING A non-staining orange scented silicone that eliminates sticking problems and annoying squeaks. LIGHTNING repels water and ice and will retard rust and corrosion. May also be used on rubber, leather, metal, nylon, wood and painted surfaces. The pleasant citrus aroma allows for use in confined spaces. (#2173) 

 

LIGHTNING UNSCENTED FG A non-staining silicone that eliminates sticking problems and annoying squeaks. Repels water and ice and will retard rust and corrosion. May also be used on rubber, leather, metal, nylon, wood and painted surfaces. (#2293)

 

LUBRA 2000 An extremely heavy-duty lubricant that provides superior protection against extreme heat and pressure conditions.  Protects against corrosion, rusting, galvanic pitting and carbon fusion. LUBRA 2000 contains molybinudisulfite and multiple heavy micro metals for unexcelled lubrication and heat protection. (#1050A)

 

LUBRON This unique product sprays on and into hard-to-reach places. LUBRON changes from a penetrating fluid to become a tough, protective grease. This cured film is impervious to moisture and is stable at temperatures above 400 degrees F. Aerosol not available in California. (#1055)

 

MAGIC GLIDE  A non-staining, siliconized lubricant.  MAGIC GLIDE is a stable blended formula that deeply penetrates, thus eliminating sticking problems and annoying squeaks. MAGIC GLIDE will repel water and ice and retard rust and corrosion. (#1034)

 

MEGA LUBE Outstanding anti-friction lubricant containing micro-particles of molybdenum disulfide. Excellent for temperatures ranging form 110°F. to 1050°F., and pressures up to 100,000 psi. MEGA LUBE will not react with water, oil, alkalies and many acids, and will not attract dust. Fast drying and oil free. (#1016)

 

ONE SHOT FG  Specifically formulated for the lubrication, maintenance and protection of equipment in the food processing industry. Lubricates precision equipment, provides lasting protection for tools, jigs and fixtures, penetrates and frees rusted or frozen parts. (#1039)

 

PAD AND SHAKER PRE-TREAT  Designed to the extend the life of expensive rubber shaker pads. Treat rubber slings prior to shaker season to allow the next generation lubricants soak into to rubber. Designed to be used with new and old rubber slings. This product will save time and money for nut tree shakers. (#1126*)

 

RELEASE 212  Non-staining, siliconized lubricant, it is a stable blended formula that deeply penetrates, thus eliminating sticking problems and annoying squeaks. RELEASE 212 will repel water and ice and retard rust and corrosion. It will lubricate and free-up sticking windows, doors, drawers, zippers, cabinets, etc. (#2076)

 

RELEASE 222 Clear silicone lubricant designed to lubricate and protect rubber tree shaker slings. This compound deeply penetrates into rubber and provides a slippery surface for reduced friction and heat build-up, while at the same time preventing bark damage to the tree. (#2002)

 

RELEASE 230 Clear non-toxic silicone/petrolatum spray lubricant designed to lubricate and protect rubber tree shaker slings. This compound deeply penetrates into rubber and then gels and thickens to provide a slippery barrier for reduced friction on the rubber to rubber surface. (#1094)

 

RELEASE 250 A gelled lubricant designed for use in the nut tree shaking industry. A thicker lubricant means less “carrier agent” and more lubricant. Sunrise’s synthetic lubricant blend means long lasting protection against gumming and rubber breakdown. (#1124)

 

SLING GLIDE II The forefront of lubrication technology in the agricultural industry. This compound is designed to lubricate and protect rubber tree shaker slings, while at the same time, prevent bark damage to the tree. In automatic water injection systems, SLING GLIDE II will be applied each time the sling clamp opens. (#2021)

 

SNIPER  A unique combination of ingredients that markedly reduce surface tension which permits rapid, deep penetration of corroded parts. SNIPER has an affinity to metal which aids penetration. Residual oil film lubricates and provides protection against subsequent corrosion. (#1110)

 

STAY SLICK FG  Formulated for long-lasting lubrication and rust protection in food processing facilities. Translucent color allows for multiple application use without concern of dye contamination. Our premium synthetic compounds are designed to out-last similar spray greases by 3 times, therefore saving time and money. (#1114)

 

SUPER GLIDE FG  A non-staining, orange-scented, silicone that eliminates sticking problems and annoying squeaks. SUPER GLIDE FG will repel water and ice and will retard rust and corrosion. The pleasant citrus aroma allows for use in processing plants as well as other confined spaces. (#1087)

 

TEF-LUBE Dry lubricant and release agent developed for use in a wide variety of applications. Once sprayed and cured, an invisible, dry lubricating film works on metal, rubber, wood, paper, glass, etc. Ideal for application where dust and dirt particles are a constant concern. Not available in California. (#1024)

 

WHAT'S COOKIN'?

Sunrise Food Division Guide

 

Do you cook, bake, bottle, brew or distill? If so, you know cleaning and sanitizing are vital parts of your business. Contact Sunrise to make sure your facility is not only being compliant but also cost effective. 

Click here for our Food Division Product Guide

ASPHALT DIVISION

Natural, easy and cost effective.

 

Sunrise offers high quality products for all your asphalt and concrete needs.We offer environmental compliance products that can be used before and after saving you time and money. 

 

Click here to explore the possibilities

REACH OUT TO  US

Sunrise Environmental Scientific

 

Toll Free: 800-648-1153

Local: 775-359-8494

Fax: 775-359-6751

Email: ses@sunrisenv.com

  • Facebook
  • Instagram
  • Pinterest
  • Twitter
  • YouTube

© 2018 SUNRISE ENVIRONMENTAL SCIENTIFIC